Colt Peacemaker, Colt Python, concealed carry, double action, Freedom Arms revolvers, Glock 22, North American Arms mini revolvers, Ruger LCR, Ruger Vaquero, S&W, S&W 686, semi autos, single action, speed loaders, suppressors
This is an update of an article I last posted in April of 2020. As I recently finished the yearly Guns and Liberty update, and since many readers are only now emerging from their basements, I thought I’d resurrect this, and several related articles, a bit early. Those of us daily involved with firearms tend to take much for granted, and I’m as guilty as any, so for the benefit of those not so conversant:
One primary question for new shooters is: revolver of semiautomatic? For those that have carried handguns daily, with and without a badge since young adulthood, the revolver vs. semiautomatic argument has gone through many phases as technology, firearms law and societal norms have changed. At one time, the idea that revolvers were in a different–and superior–reliability class relative to semiautomatic pistols was mostly true. No longer. In fact, for most new shooters, there is a decided preference for semiautos, if for no reasons other than that they are ubiquitous, in gun shops and in general distribution.
There’s an old story about a reporter that asked a weathered (of course) Texas Ranger why he carried a .45. He replied in a slow drawl (also of course): “Because they don’t make a .46.” The point is one should carry the most effective weapon one can efficiently manage (and conceal). A large, heavy and powerful handgun uncomfortable to carry, and often left at home, is far less effective than a smaller, lighter and less powerful handgun that is easy to conceal and carry, and carried daily. Anyone who knowingly enters a gunfight armed with less than a rifle (or submachine gun) is asking to die. Long guns are much easier to shoot accurately at much greater than handgun ranges and their cartridges are generally far more effective. However, since it’s difficult or impossible to carry such weapons on a daily basis, a handgun remains the best alternative.
The choice of a personal defensive handgun needs to take into account many factors, but ultimately one should choose one that’s powerful, concealable, reliable, one they can shoot well, and with which they are comfortable. Attaining all of those qualities is difficult; compromise is normally the order of the day. That said, the choice is at once simpler, and more difficult, than many imagine. No, I’m not trying to be confusing; read on.
REVOLVER OR SEMIAUTOMATIC?
Revolvers predate semiautomatics. Revolvers are so-called because cartridges are loaded into a steel cylinder commonly holding five or six rounds, though some major caliber, full sized revolvers hold one or two more and some .22LR revolvers hold as many as 10. Pulling the trigger and/or cocking the hammer mechanically rotates–revolves–the cylinder bringing a live round into precise alignment with the barrel. The cartridge aligned with the barrel at rest will not be the first cartridge fired. Revolvers come in two primary action types: single action and double action. Some with a shrouded or internal hammer are capable of only double action fire.
Single action revolvers are like the Colt .45 handguns of cinema westerns. The first step in firing requires cocking the large, external hammer, usually with the strong hand (the hand holding the revolver) thumb. This activates internal mechanical linkage that rotates the cylinder to align the next cartridge with the barrel while holding the hammer fully back, ready to be released to drive forward under spring tension with a pull of the trigger. The resulting short and light trigger pull serves only to release the hammer to strike the primer of the cartridge (pulling the trigger does not cause the cylinder to revolve)—the firing pins of the early designs of such weapons were often fixed to the hammer–firing the cartridge.
This revolver is the modern Ruger Vaquero, however it faithfully reflects the general configuration of the genre, including a rear sight rudimentary by contemporary standards. Circa April, 2021, its MRSP is $829.00. Such weapons are generally inappropriate for personal defense. Experts can do amazing things with these designs, which are more than a century old. Manufacturers continue to produce modern versions that are completely safe to use with modern cartridges. Some have fully adjustable sights—many have only a groove machined in the topstrap–and most have modern safety features that allow them to be safely handled with fully loaded cylinders, but they are large, heavy, slow to fire and even slower to reload. They’re great fun for target shooting, or western style shooting competitions, but modern weapons have surpassed them in convenience and effectiveness.
One narrow exception is modern single action revolvers designed for hunting, such as the handguns of Freedom Arms of Wyoming. These stainless steel revolvers retail for $2500 dollars or more, are truly huge, are designed to be used with optical and/or electronic sights (scope mounts available from the factory are substantial indeed), and fire cartridges of such size and power their cylinders are non-fluted and hold only five rounds. Some of these cartridges rival rifle ammunition in power, and recoil and muzzle flash are impressive, and for most, punishing. These are essentially handmade and fitted weapons, and a wide variety of options are available.
NOTE: Original single action revolvers like the famous Colt Peacemaker design should have only five out of six chambers loaded and should be carried with the hammer down on the empty chamber. This is necessary because, lacking any kind of firing pin safety–most modern single action revolvers have this feature and their cylinders may be safely fully loaded–a blow on the hammer can drive the firing pin into the primer of a cartridge, firing the weapon. Anyone owning such weapons should be absolutely certain of its safety features, or the lack thereof.
Double action revolvers are more modern weapons, and can be fired in double action mode, with a long, relatively heavy trigger pull that rotates the cylinder, simultaneously cocks the hammer, and ultimately drops the hammer to strike the primer and fire a cartridge. As a result, revolvers do not have mechanical safety devices that must be manipulated in order to fire the weapon. They also have a single action mode—much like single action only revolvers–where manually cocking the hammer rotates the cylinder and moves the trigger to the rear of the trigger guard, producing a short, light trigger pull. Owners of double action revolvers should always train to use their weapon in double action mode. It is very easy indeed to unintentionally fire a cocked revolver in single action mode when under stress.
At one time, virtually all American police officers carried full-sized duty revolvers, initially in .38 Special, but ultimately in .357 Magnum after that cartridge was developed. The .357 Magnum is a .38 Special cartridge with a slightly longer case, which allows more powder, hence greater velocity and power. This Smith and Wesson Model 686 .357 magnum is an example of a modern full-sized double action revolver. Beautifully made, but expensive–circa April, 2021, $853.00 MSRP–it is a large and heavy revolver, which is necessary to stand years of firing full-charge .357 ammunition, which produces significant muzzle flash and considerable recoil. It is also labor intensive to produce, and as a result, costly.
This small revolver—the Ruger LCR —in .38 special caliber—is state of the art in revolver design with its polymer frame, relatively low bore axis, relatively smooth trigger and relieved/lightened cylinder. Circa April, 2021 its MSRP is $579.00. Notice that it uses an internal hammer. It cannot be cocked, or fired, in single action mode; it is a double action only revolver. Its primary design goals were obviously ease of concealment, the use of advanced, non-traditional materials and as little weight as possible.
Notice too that the gun has no adjustable rear sight, which is common in small-framed revolvers, which are designed for concealment and short distance shooting. Protruding sights tend to catch on pockets and other clothing. In .38 special, like most small-framed revolvers, it holds only five rounds. The .22LR version of this revolver holds eight, but .22LR, as versatile and useful as it is, is a mediocre choice in a personal defense handgun.
REVOLVER ADVANTAGES AND DISADVANTAGES:
Modern double action revolvers come, generally, in large, medium and small sizes. However, as previously noted, there are some revolvers made for hunting or competition with very large magnum cartridges that fall into the “huge” category. Such weapons are universally made of steel, are very heavy, and commonly have barrels of 6” or longer. On the opposite side are mini-revolvers, such as the stainless steel, derringer-like, 5 shot .22LR (Long Rifle) weapons made by North American Arms (an article on that little revolver can be found here).
Such weapons, which fire single action only, are made primarily as back-up guns, or for circumstances that prevent the carrying of a larger weapon. Unfortunately, their barrels are very short—just over an inch in standard configuration–which can cause keyholing (for the appearance of the holes their projectiles leave in paper targets), or unstable bullets tumbling end over end. As a result, their accuracy beyond a few yards is generally poor, their penetration ability is limited, reloading requires removing the entire cylinder from the weapon, individually poking out the empty cases–using the rod on which the cylinder rotates–replacing them, and reinstalling the cylinder in the frame. This does, however, make them easier to clean than most other revolvers. For the inexperienced, and even more experienced shooter, they are hard to shoot with any degree of consistent accuracy, to say nothing of the general unsuitability of the .22LR cartridge in the self-defense role. Such weapons would be a poor choice as a sole personal defensive arm.
Large, or full-sized revolvers generally hold six rounds (though a few designs hold seven or eight), have at least a 4” barrel, and usually have fully adjustable rear sights (adjustable for windage–side-to-side, and elevation–up and down). This class is generally considered to be “duty” revolvers of the kind a diminishing number of police forces issue. Unless one is a large, strong person, concealing such weapons is difficult. They are best carried in exposed holsters on substantial belts. It is possible to conceal them with the right holsters, but they are big, heavy handguns built to take substantial wear from powerful cartridges over the long term.
Medium framed revolvers also share barrels of the same lengths, but are lighter and not as solidly built. However, they will still provide many years of service for most people. Many models have barrels from 2” to 3” and some do not have adjustable rear sights. They are generally somewhat smaller and weigh somewhat less than fully sized revolvers, offering reasonable concealment possibilities for some–usually larger–people. Medium and large revolvers, particularly with four inch barrels, are generally hard for people with short torsos–women in particular–to conceal.
Small frame revolvers like the Ruger LCR commonly have barrels of around 2” length and are of only five round capacity. They rarely have adjustable rear sights. Most rear sights are notches or grooves machined—or molded–into the top strap of the weapon. They commonly have small grips, though most manufacturers are now producing them with larger, softened polymer grips that fit the hand better and help absorb recoil, which in small revolvers, can be substantial. Such weapons are designed in recognition of the fact that full and even medium sized revolvers are not easily concealed. Some revolvers in this class have frames made of a variety of metals for reduced weight, but their barrels and cylinders generally must be steel. Some of the newer weapons in this class, such as the Ruger LCR are being manufactured with frames and some parts made of polymer to reduce weight as much as possible.
ADVANTAGES OF MODERN, DOUBLE-ACTION REVOLVERS: Because they have no separate safety devices, they are simple; pull the trigger and they go “bang.” In fact, long, heavy double action trigger pulls are usually thought to be an inherent safety feature, requiring the shooter to really intend to shoot to discharge the weapon. Revolvers do not have mechanical safety devices that must be manipulated in order to fire the weapon. On the other hand, short, light single action trigger pulls are, with justification, thought to be dangerous because they are far more prone to unintentional discharge. It is also easy to load and unload revolvers, and one can tell at a glance if they are loaded. Properly maintained, revolvers–particularly in stainless steel–can last a lifetime. Stainless steel does rust, but is less susceptible to rust than other steels commonly used in firearms.
Revolvers represent well-developed technology and manufacturing methods and are relatively free of inherent malfunctions. With speed loaders, like this Safariland Comp. I, they can be reloaded reasonably quickly–during my police days with revolvers, I could reload in the 3 second range, sometimes less–though experts can reload with amazing speed even without speed loaders. High quality revolvers are also potentially more accurate than many semiautomatic pistols, though relatively few shooters are skilled enough to notice any actual difference at common handgun ranges (25 yards and less). There is a difference between intrinsic accuracy—the accuracy potential of the design–-and practical accuracy, which is what a given person can hope to accomplish with a given handgun.
Keep in mind there is intrinsic recoil–the actual recoil produced by a variety of factors, including the weight and design of the weapon, if a revolver, its grips, the specific cartridge fired, and other factors, such as the stance/grip used by the shooter. Then there is felt recoil, which is the recoil experienced by each individual. A 6′, 200 pound man with considerable arm and grip strength will experience far less felt recoil firing a given revolver than a 5’2″ 110 pound woman. Proper stance/grip can significantly mitigate felt recoil, but intrinsic recoil will always be present.
With the wide range of different materials and shapes available, most people can adapt a given revolver to their unique hand by simply exchanging factory for aftermarket grips, though some polymer factory grips will work for many people. Revolvers are also capable of handling the largest, most powerful pistol cartridges, but only with very large, heavy and hard-recoiling weapons.
DISADVANTAGES OF REVOLVERS: The higher the bore axis (the distance of the barrel above the hand) of a handgun, the greater the recoil effect on the shooter. Virtually all revolvers, by design, suffer from this inherent problem, a problem made worse by more powerful cartridges and lighter weapons. It is ironic that in an attempt to make some revolvers more easily carried and concealed, manufacturers have also greatly increased the recoil effect (from light weight), muzzle blast and report (from short barrels), small grips, and lessened accuracy (by means of shorter barrels and small, non-adjustable sights). Small .38 caliber revolvers are notorious for their sharp—even painful—recoil, and dazzling muzzle flash and report.
Muzzle flash is primarily the result of the combustion of unburned powder ignited by the high temperature gasses produced in firing a cartridge. Generally, the shorter the barrel, the greater the muzzle flash.
The long, heavy trigger pulls commonly considered a safety feature also make accuracy difficult. When shooting, one must essentially isolate the trigger finger from the rest of the hand and hold the entire weapon absolutely steady through the entire, long, heavy trigger pull. Old time shooters learned this difficult skill by balancing coins (flat, not on edge; that would be a real trick!) on their front sights while practicing double action trigger pulls with an unloaded gun. As one might imagine, people with larger, stronger hands–usually men–have the advantage here.
While speed loaders greatly lessen reloading times, they tend to be inconvenient for most people for concealed carry because they must be as large as, and actually longer than, the cylinder of the revolver. This complicates concealment. In addition, many grips interfere with speed loaders and often have to be “relieved,” which consists of removing any grip material in the way. This is not particularly difficult, but does take some skill and specialized tools, and if wooden grips, finishing material like polyurethane.
Some suggest revolvers are unfailingly reliable, but revolvers are very dirt sensitive and can and do malfunction. This is one of the primary reasons virtually every military issues semi-automatic pistols rather than revolvers. Even with well-maintained revolvers a tiny piece of grit under the ejector “star” can actually jam the cylinder, preventing the gun from firing. Remember that the cartridge aligned with the barrel at rest will not be fired. When the trigger is pulled (or the hammer is cocked to single action mode), the cylinder rotates to the next cartridge, so if the cylinder won’t rotate, the shooter will not be able to fire a single round. Unfortunately, almost anything other than grit under an ejector star that causes a malfunction in a revolver is due to breakage of or damage to internal parts and cannot be quickly repaired in the field without tools. If one is under fire, this is a significant weakness indeed. Revolvers must be kept scrupulously clean, but many designs are ironically time consuming and demanding to clean thoroughly and properly, with six to seven separate tubes–the chambers and the barrel–requiring careful attention.
NOTE: A malfunction is a stoppage that can be fixed in the field by hand, usually within a few seconds. A jam is a stoppage that cannot be fixed quickly by hand and which usually requires tools and/or replacement parts and a trip to the shop.
Even expensive, top of the line revolvers have the same potential weaknesses. In my early days of police work, I carried Colt Pythons, very expensive, very accurate, high quality weapons, as did several of my police shooting buddies. One day at a range session, one of my friend’s brand new Pythons suddenly started sending bullets down and to the side of the target. He couldn’t figure it out and asked me to take a look. I peered down the sights and was amazed to find the barrel had come unpinned and was, under the recoil of .357 Magnum duty (fully-charged) ammunition, unscrewing itself from the frame. The front sight was cocked at an angle! I opened the cylinder, unscrewed the barrel with my bare hands and handed my open-mouthed pal the two parts, announcing deadpan I was reasonably sure I’d identified the problem. A good gunsmith quickly and cheaply fixed the gun, but even the best and most costly handguns can experience unexpected problems.
NOTE: After many years, Colt is once again manufacturing the Python. It’s a beautiful gun, and is reportedly an improvement on past Pythons in terms of trigger and ruggedness, but expect to pay no less than $1500—probably more–if one can be found.
Cylinder cranes and ejector rods are likewise prone to damage. A bent ejector rod is almost always a jam, requiring tools to repair. In this case, repair is best done by replacement. I certainly would not trust an ejector rod bent back into shape. Anyone flipping out a cylinder or violently snapping it back into place with the flip of a hand like TV gunslingers is looking for a bent crane and an expensive visit to a gunsmith. Whenever the cylinder is out of the frame–-as in ejecting spent rounds from the cylinder and/or reloading–-those parts must be handled with gentle care. The kind of idiotic handling of revolvers one sees in movies or on TV is highly likely to result in damage that will quickly render a revolver an expensive paperweight. Don’t get me started on people who “spin” cylinders. Not only is such foolishness utterly unnecessary, at the least it causes accelerated wear on fragile parts, and at worst, can damage the weapon, leading to malfunctions, even jams, at the worst possible times.
The exposed hammers of small revolvers are prone to hanging up in pockets or clothing. Many manufacturers have designed smaller, or “bobbed” hammers, made shrouds around external hammers, or have even made internal hammer designs to address this well-known problem. The aforementioned Ruger LCR has an internal hammer and cannot be fired single action. Careful holster design can minimize this unfortunate snagging tendency.
The largest problem with revolvers remains their long, often rough double action triggers. This factor makes revolvers much more difficult to shoot with consistent accuracy than semi-automatic pistols. This problem can be addressed, to a degree, with an action job by a competent gunsmith, but that’s additional expense, commonly in the $200+ dollar range. Some revolvers now come from the factory with much better triggers than in the past, but this is still an issue to be considered.
An interesting side note is the New York Police Department, which limits officers to a small number of semiautomatic pistols, but mandates 12 pound triggers, which essentially gives them the same trigger pulls as double action revolvers. The brass distrust their officers and believe heavy triggers can substitute for proper training. They can’t, as this article explains.
It should also be noted that this problem is exacerbated with smaller, lighter more concealable weapons, and made even worse by the recoil effects of full-powered, as opposed to lighter loaded target, ammunition. Smaller men and many women often find long shooting sessions actually painful, and any weapon painful to shoot will dramatically degrade accuracy and effectiveness. It is ironic that even full-sized, heavy revolvers, which are poor choices for concealment, can suffer from this problem, though to a lesser degree and requiring more rounds fired.
Consider the experience of a police department for which I once worked. In the mid-90s that agency was run by an anti-gun chief. The issued weapon was the S&W model 686, a stainless steel, 4” barrel, .357 magnum revolver. As an issued weapon–the only weapon allowed for every police officer–it was a mediocre choice. On one hand, it was–and is–a high quality, reliable weapon. Its stainless steel construction made it easier to maintain—most cops seldom clean their handguns–and the Federal 125 grain hollowpoint duty cartridge was an effective choice. On the other, the revolver was very large, heavy, had substantial muzzle blast and report, substantial intrinsic and felt recoil, was difficult to conceal, and the only concession allowed the individual officer was the choice of a few different styles of rubberized grips.
Female officers had a hell of a time with the weapon. We used to joke-–sort of-–that even if we missed, the bad guys would be incinerated by the muzzle blast. Night-firing qualifications were wonders to behold; each round illuminated the area like a lightning strike.
I had no difficulty with revolvers, but I became a police shooter in a time of few reliable semiautomatic pistol choices. I was also willing to reload and devote considerable personal time and money to develop my skills. As a result, I became adept with the revolver, even earning the top shooter honor in my first basic academy class.
I’m also a 6’, 200+ pound man with larger than average hands and greater than average strength. Consider too that I was–and am–an avid shooter, so I was far more practiced than most of my compatriots (most cops are not shooters). Even so, after 50 rounds of qualification with full-charge cartridges, I was feeling the beginning effects of fatigue in my hands and arms and glad to be done. Many of my smaller, less experienced colleagues absolutely hated to shoot their handguns, wincing with each report and actually experiencing bruises and abrasions on their hands. Their qualification scores reflected this reality. Still, if my only option for a duty weapon had to be a stainless steel Smith and Wesson in .357 caliber, the 686 would probably be my choice.
Because of the necessary width of their cylinders, overall configurations, and their weight distribution, revolvers are generally wider and more difficult to conceal than semiautos. Another matter to consider is that because of their designs, revolvers can become “out of time.” In other words, the cylinder no longer precisely aligns cartridges with the barrel. This can cause splashback of portions of a bullet, and in extreme cases, injure the shooter or bystanders. While this is usually not seen outside of significant mechanical failure or significantly worn (as in mechanically degraded) weapons, it is something about which to always be aware with revolvers.
Revolvers also tend to be much harder to accessorize than semiautomatic pistols. Adding laser sights, optical sights and lights is much more difficult, and options, fewer. Though some custom revolvers, like the S&W in the header photo, can be outfitted with such accessories, it usually takes a gunsmith to install the necessary mounts, where with many contemporary semiautomatics, accessory rails are built into the design, and an increasing number are capable of accepting optical sights.
One final, slightly obscure observation; despite what Hollywood would have us believe, revolvers do not work with suppressors. There is no such thing as a “silencer,” and suppressors merely reduce the sound pressure level of a gunshot to the point that they don’t cause hearing damage. They are still recognizable as gunshots. They don’t work with revolvers because suppression is all about gas control. The gas escaping from the gap between the cylinder and the forcing cone (where the bullet enters the barrel upon firing) renders them useless with revolvers.
Police experience is revealing. Police agencies transitioning from revolvers to semiautos have commonly found the hit ratio of their officers, on the range and in actual gunfights, significantly improves. This was my experience when an agency of some 100 officers for which I worked transitioned to Glocks in .40 S&W caliber. Officers who struggled to make minimum passing scores with their .357 revolvers were consistently scoring higher with less effort and no fatigue or pain. Officers who were highly skilled demonstrated far less variation. One hundred percent shooters are 100% shooters for a reason. In other words, semiautos are generally easier to shoot accurately (practical accuracy) than revolvers despite the fact revolvers may have greater intrinsic accuracy.
Despite this litany of potential problems, modern, quality revolvers are generally quite safe and reliable and will usually fire every round without fail right out of the box. Their prices are also competitive with semi autos. However, no one should carry or rely on any firearm for self-defense without function verification and familiarization training consisting of firing several hundred rounds through the weapon.
I hope to see you again next Tuesday for an updated semiautomatic pistol primer.